Ericsson cordless phone systems

1. Integrated solutions

2 Solutions that connect to any existing brand PABX

  2.1 Cordless Model: DCT1800-S

The Ericsson DCT1800-S is a cordless system with analogue connections designed specifically for small and medium-sized businesses. It supports up to 8 base stations and 40 cordless phones, giving high quality cordless communication at an attractive price. It will maintain the value of precious investment in telecommunications because it adds on to the existing PBX rather than replacing it.

The DCT1800-S is available in 4 pre-assembled versions for 8, 16, 24 or 32 users. Therefore no internal installation work like sliding in boards is needed. The system can be expanded up to 40 analogue lines.

  2.2 Cordless Model: DCT1800-GAP

The DCT1800-GAP system is targeted as stand-alone business cordless application, to be used together with a PBX. Except for cordless mobility, DECT does not offer a specific service; it is transparent to the services provided by the connected network. The DCT1800-GAP system can be connected to virtually any PBX or centrex lines.

DCT1800-GAP is a cordless solution that integrates smoothly with the existing PBX, so cordless voice communication and text messaging can be added without having to replace the existing wire line infrastructure. With capacity for 600 users via a digital interface and 216 users via an analogue interface, the system is suitable for medium to large operations. Thanks to the modular architecture and adherence to open standards, the DCT1800-GAP can be easily expanded as the telecommunications needs evolve well into the future.

The radio exchange interfaces between the PBX and the base stations. Incoming and outgoing calls are routed via the radio exchange. The radio exchange is housed in a modular cabinet.

The radio exchange is connected to the PBX by standard analogue two-wire subscriber lines and/or by a digital interface.

Standards RS232 ports on the cabinet make it possible to connect a personal computer and a printer to the system. The personal computer is necessary for system initialisation, system fault tracing and system statistics information retrieval. A hardcopy of system error messages can be obtained via the printer.

 

Supporting / Upgrading your Cordless System DCT1800


1/December/ 2013: Your DCT1800 radio exchange cordless system branded Ericsson, Nira or Ascom DECT cordless system was originally designed and developed by Ericsson and can be depicted as follows:

The typical cordless system is branded Ericsson/Nira/Ascom:

pbx

The handsets can be Ericsson, Nira or Ascom. As can the base stations, the cabinet/DCT1800 radio exchange (DCT1800) and cards in the radio exchange. Ericsson of course designed all protocols and standards in the system, and provided all handsets and parts for the system originally, some being co-developed or co-branded or rebranded by others. In the diagram above the PABX telephone system is your existing phone system and can be any brand phone system of course.

Support Options and upgrade options:

Supporting the DCT1800 cordless system without changing it!
Ericsson Cordless Solutions offers full support, cards, parts maintenance on your existing systems anywhere in Australia (and we do the same in some locations internationally). We will support your DCT1800 radio exchange system for at least another 3 years with parts, handsets, cards, power supplies, base stations, on-site and remote support, field service and maintenance plans if those are needed.

Contact us nationally in Australia on 1300 765 543 to discuss these options available to you to gain ongoing support of your existing DCT1800 system (or Ericsson business phone system) system with no changes required.

Note some customers have been approached to move to an IP-DECT Migration, because of a stated DCT1800 Radio Exchange Phase-out. But here at ECS we prefer to assist customers with options to remain with their existing DC T1800 radio exchange systems maintained and supported and with lower cost upgrade options when the options is timely for the customer!

Supporting the DCT1800 cordless system and adding some new handsets
Ericsson Cordless Solutions can provide new handsets to mix and match into your existing bunch of handsets or to change out all the handsets if desired -- it’s entirely your choice. We will support your DCT1800 radio exchange DECT system with parts, handsets, cards, power supplies, base stations, on-site and remote support, field service and maintenance plans if those are needed.

Contact us nationally in Australia on 1300 765 543 to discuss these options available to you to gain support and/or upgrade of your existing DCT1800 system with few or minimal changes and minimal cost.

Cordless system DCT1800 options if IP or SIP connectivity is desired:
We can also advise you on options to upgrade parts of the system at lowest cost to you the owner. You can upgrade different parts separately without having to invest much financially.... For instance:
*** Upgrade to some Newer model cordless handsets alone (but keep the same investment in base stations and main box DCT1800.)
*** Upgrade to a Newer model Main Box DCT1800 (but keep the same base stations and cordless Ericsson /Ascom handsets without financial investment)

Contact us nationally in Australia on 1300 765 543 to discuss these options available to you to gain support and/or upgrade of your existing DCT1800 system with few or minimal changes and minimal cost.

Cordless system upgrade using IP-DECT Migration equipment:
Here we show one path to upgrade the system to start to use SIP connectivity. (and assumes that your phone system does not have a SIP trunk interface.) You can fully retain your existing investment and just SIP connect it.
Here we can either just add a SIP gateway to the existing DCT 1800 system and keep your DCT1800 in place, or alternatively we can replace the cordless system DCT1800 by adding the SIP/IP gateway we can provide.

voice gateway

Contact us nationally in Australia on 1300 765 543 to discuss these options available to you to gain support and/or upgrade of your existing system with few or minimal changes and minimal cost.

Cordless system upgrade using IP-DECT migration and IP connection to PABX or IP-PBX:
Here we show another path to upgrade the system assuming that your phone system does have a SIP trunk interface or you plan one that does.
You can fully retain your existing investment and just SIP connect it.

SIP

 

 

Contact us nationally in Australia on 1300 765 543 to discuss these options available to you to gain support and/or upgrade of your existing DCT1800 system (or Ericsson business phone system) with few or minimal changes and minimal cost.

 

© 2017 Australian Cordless Communications Pty Ltd